EN 
ES
AR
NL
JA
KO
FR
RU
3MS1SWJ102VS2QES free sample ON-OFF 3 pins round waterproof rocker switch
Series:3MS1
Quick Detail:
Type: 3MS1SWJ102VS2QES
Construction category: D
Operation method: Rocker Action
Configuration: Single-Pole Double-Through (SPDT)
Terminal form: #PCB-connect Terminal
Mounting: Snap-In
Protection: IP67
- Remarks
- Applications
- Technical parameters
Remarks
-
SAFETY APPROVAL & RATING:
Approved Rating
Mark
Reference No.
UL&CUL
E104190
VDE
CQC
PARTS LIST:
NO.
Items
Material
1
Case
Phthalate (DAP)(UL94v.0).
2
Actuator
Nylon black std.
3
Bushing
Brass, nickel plated.
4
Housing
Stainless Steel.
5
Switch Support
Brass, Tin plated.
6
Terminals/contact
Brass, silver or gold plated
Returned plastic should not exceed 20%.
Applications
Home / Household Appliances
Electric kettle, Robot cleaner, Dust catcher, Vacuum cleaner, Coffee maker, Running machine etc.
Electronic Equipment
Toys, Power tools, Car control panel etc.
Medical Equipment
Communication Equipment
Automation Equipment
Automotive Electronics
Instrumentation
Technical parameters
1.DETAIL SPECIFICATIONS:
Type:3MS1SWJ102VS2QES
Construction category:D
Operation method:Rocker Action
Configuration:Single-Pole Double -Throw (SPDT)
Terminal form:#187 quick-connect Terminal
Mounting:Snap-In
Protection:IP65
1.1 General
1.1.1 Application This specification is applied to 3MS1 Power Switch used for electronic equipment.
1.1.2 Operating temperature range -30
403. That’s an error.
We're sorry, but you do not have access to this page. That’s all we know.
1.1.3 Test conditions Unless otherwise specified. The atmospheric conditions for making measurements and tests are as follows
Ambient temperature: 15~35℃
Relative humidity: 45~85%
Air pressure: 86~106kPa (860~1060 mbar)
Should any doubt arise in judgment. tests shall be conducted at the following conditions.
Ambient temperature: 20±2℃
Relative humidity: 60~70%
Air pressure: 86~106kPa (860~1060 mbar)
1.2 Appearance construction and dimensions
1.2.1 Appearance Switch shall have good finishing, and no rust crack or plating failures.
1.2.2 Construction and dimensions Refer to individual product drawing.
1.3. Electrical Characteristics
|
NO. |
Items |
Test conditions |
|
1.3.1 |
Contact resistance |
The contact resistance should be 10mΩ(Max). |
|
1.3.2 |
Insulation resistance |
It is measured with 500V DC 1minute should be 1000MΩ(Min). |
|
1.3.3 |
Dielectric strength |
AC 2000V,1min.(before endurance test) AC 2500V,1min.(after endurance test) |
1.4 Mechanical Characteristics
|
Item |
Description |
Test Conditions |
|
1 |
Operating Force |
350gf±100 |
|
2 |
Mechanical life |
The mechanical life all of 10 000 cycles |
|
3 |
Electrical gap |
Min. 3.0mm (IEC61058) |
1.5 Durability
|
NO. |
Item |
Test condition |
Criteria |
||||||||||||||||||
|
1.5.1 |
Endurance (According to UL61058) |
5A 120VAC 2A 250VAC Switch shall be operated according to following sequence (Test1~Test2)
Voltage proof(Cut-off current:0.5mA) 5A 120VAC 2A 250VAC Switch shall be operated 40,000 cycles at 15-20 cycles/min. Test voltages shall be applied for 1 min |
Insulation resistance(item 3.2): 1000MΩ MIN Voltage proof: Terminal and ground:1000VAC No dielectric breakdown shall occur. Operating characteristic (item 4.1): Operating characteristic variety Within ±20% of specifiedvalue . 6000 cycles temperature rise:45℃MAX; 10,000 cycles temperature rise:55℃ MAX;
No abnormalities shall be recognized in appearance and construction |
||||||||||||||||||
|
1.5.2 |
Endurance (According to EN61058-1 /IEC61058-1) |
5A 120VAC 2A 250VAC Switch shall be operated 10,000 cycles at 15~20 cycles/min Voltage proof(Cut-off current:0.5mA) Test voltages shall be applied for 1 min. |
Insulation resistance(item 3.2): 1000MΩ MIN Voltage proof: Terminal and terminal:750VAC Terminal and ground:1500VAC No dielectric breakdown shall occur. Operating characteristic (item 5.1): Operating characteristic variety Within ±20% of specifiedvalue . Temperature rise:55℃ MAX No abnormalities shall be recognized in appearance and construction |
1.6. SOLDERING
Solder ability and Resistance to sold heat according to IEC 68-2-20
2. DRAWING & DIMENSION:
3. PACKING:
|
3.1 |
Packing material: |
Plastic box |
|
3.2 |
Packing number: |
|
|
3.3 |
Weight: |
|
|
3.4 |
Size: |
|