EN 
ES
AR
NL
JA
KO
FR
RU
SW11-DA-03 1Pins Cabriole leg Switch DIP Switch Piano Push Switch
Series:SW11-DA-01
Quick Detail:
Type: SW11-DA-03
Operation method: DIP Switch
Comply with: ■IP40 □IP65 □IP67 □IP68
Rating: DC 50V 0.3A
- Remarks
- Applications
- Technical parameters
Remarks
PARTS LIST:
|
ITEM |
DESC. |
MATERIALS |
|
1 |
ACTUATOR |
THERMOPLASTIC PBT UL 94V-0 |
|
2 |
COVER |
THERMOPLASTIC PBT UL 94V-0 |
|
3 |
CONTACT |
PHOSPHOR BRONZE |
|
4 |
TERMINAL |
BRONZE |
|
5 |
BASE |
THERMOPLASTIC PBT UL 94V-0 |
Applications
1.Digital Products: digital camera, digital video and so on;
2.Remote Control: the remote control of automobile domestic security products;
3.Communication Products: mobile phone, vehicle-mounted phone, telephone set, building equipment, PDA and so on;
4.Homehole appliances: TV set, microwave oven, electric rice cooker, electric fans ，refrigerator，washer;air-conditioning and so on;
5.Security Products: visual interphone, monitor and so on;
6.Toys: electric toys and so on;
7.Computer Products: PC camera and so on;
8.Exercises Machines: treadmills, massage armchair and so on;
9.Medical Device: sphygmomanometer, thermometer, hospital call system and so on;
10.Others: laser pen ，Pointer，Wireless mouse remote control pen，Laser projection pen，page turner，electronic pen；MousePen；overhead projector and so on;
11.Operating switches in all types of electronic equipment such as audio devices, office devices, communication devices, measuring instruments, TVs, video recorders，automotive sets, etc.
12.Household appliances, electric force, telecommunications, machine tool, vessel, textile, printing, Mining machine, Music Instrument, etc.
Technical parameters
1.1 GENERAL CHARACTERISTIC:
1.1.1 Application This specification is applied to DIP Switch used for electronic equipment.
1.1.2 Operating temperature range -20℃ + 70℃
1.1.3 Test conditions
Unless other specified. The atmospheric conditions for making measurements and tests are as follows:
Ambient temperature: 5~35℃
Relative humidity: 45~85%
Air pressure: 86~106kPa (860~1060 mbar)
Should any doubt arise in judgment. tests shall be conducted at the following conditions.
Ambient temperature: 20±2℃
Relative humidity: 60~70%
Air pressure: 86~106kPa (860~1060 mbar)
1.2 Appearance construction and dimension:
1.2.1 Appearance
Switch shall have good finishing, and no rust crack or plating failures.
1.2.2 Construction and dimensions
Refer to individual product drawing.
1.3. ELECTRICAL SPECIFICATION
|
NO. |
Items |
Test conditions |
Criteria |
|
1.3.1 |
Contact resistance |
Shall be measured at 1KHz SMALL CURRENT(100 mA OR LESS) by voltage drop method after some operations without load. Applied position: Between terminal and terminal |
50mΩ MAX |
|
1.3.2 |
Insulation resistance |
Test voltage: 100VDC, measured after 60 ±5s Applied position: 1)Between terminal and terminal 2)Between terminal and ground |
100MΩ MIN |
1.4. ENVIRONMENT RESISTANCE
|
NO. |
Items |
Test conditions |
Criteria |
|
1.4.1 |
Low Temperature |
After testing at -25±3℃ for 96 h, the switch shall be allowed to stand under normal room temperature and humidity condition for 1h, and then measurement shall be made within 1 h. water drops shall be removed. |
Contact resistance(item 4.1): 200mΩ MAX Insulation resistance (item 4.2): 50MΩ MIN Voltage proof: (item 4.3) No dielectric breakdown shall occur. Operating characteristic (item 5.1): Operating characteristic variety Within ±10% of specified value . No abnormalities shall be recognized in appearance and construction.
|
|
1.4.2 |
High Temperature |
After testing at 85±2℃ for 96 h, the switch shall be allowed to stand under normal room temperature and humidity condition for 1h, and then measurement shall be made within 1 h. |
|
|
1.4.3 |
Steady Damp-heat |
After testing at 40±2℃ and 90-95%RH for 96 h, the switch shall be allowed to stand under normal room temperature and humidity condition for 1h, and then measurement shall be made within 1 h. water drops shall be removed. |
|
|
1.4.4 |
Change of temperature |
After 5 cycles of following conditions the switch shall be allowed to stand under normal room temperature and humidity condition for 1h, and then measurement shall be made within 1 h. water drops shall be removed. |
|
|
1.4.5 |
Salt mist |
he switch shall be checked after following test: 1) Temperature: 35℃±2℃ 2) Salt solution : 5±1%(solids by mass) 1) Time: 24±1 hour After test，salt deposit shall be removed by running water.
|
1.5. WELDING PERFORMANCE
|
1.5.1 |
Solder ability |
Switch test under such conditions and inspect after. 1）Variable temperature range ：235±5℃； 2）Dip time：3±0.5s； |
The area of dip tin should capture the 95% impregnated area |
|||||||||
|
1.5.2 |
Resistance to soldering heat |
The switch will be inspect under such conditions below Temperature and impregnated time
|
All of the appearance, motor functions, electrical properties are no abnormal. |
1.6. MECHANICAL CHARACTERISTICS
|
NO. |
Item |
Test Condition |
Criteria |
|
1.6.1 |
Operration Force |
Lateral push
|
200gf MAX |
|
1.6.2 |
Travel to Closure |
In the horizontal direction switch handle opration,with an equal to 2 times the thrust of the switch fromone position to the next gear, moving distance measuring handle. |
2mm±0.2mm |
|
1.6.3 |
Stem Strength |
And along the running direcition at apex handle (500g) on the strength test, time is 30 seconds. |
|
1.7 . DURABILITY
|
NO. |
Item |
Test Condition |
Criteria |
|
1.7.1 |
Life Test |
An actuator shall be with a thrust of no great than 1 times switch power to 10,000 cycles. At a speed of 30 cycles for 1 minutes. |
1)Contact resistance(item 4.1): 200mΩ MAX 2) Life time: 3) 10,000 cycles
|
|
1.7.2 |
Stem Strength |
And along the running direcition at apex handle (500g) on the strength test, time is 30 seconds. |
|
2. DRAWING & DIMENSION:
5. PACKING:
|
5.1 |
Packing material: |
Tube |
|
5.2 |
Packing number: |
53 pieces per tube |
|
5.3 |
Weight: |
Gross Weight: 2.6kg Net Weight : 2.4kg |
|
5.4 |
Size: |
550 x 380 x 260 CM |