EN 
ES
AR
NL
JA
KO
FR
RU
ERD30103-1B
Series:ERD30103-1B
Quick Detail:
Type: ERD30103-1B
Construction category: D
Operation method: Revolve DIP Action
Terminal form: #PCB Terminal
Mounting: Stick in
Protection: IP40
- Remarks
- Applications
- Technical parameters
Remarks
-
PARTS LIST:
NO.
NAME:
MATERIAL
1
Base
PBT engineering plastic
2
Cover
PBT engineering plastic
3
Push Stem
PBT engineering plastic
4
Terminal
Alloy copper –Gold plated
Returned plastic should not exceed 20%。
Applications
Home / Household Appliances
Electric kettle, Robot cleaner, Dust catcher, Vacuum cleaner, Coffee maker, Running machine etc.
Electronic Equipment
Toys, Power tools, Car control panel etc.
Medical Equipment
Communication Equipment
Automation Equipment
Automotive Electronics
Instrumentation
Technical parameters
1. DETAIL SPECIFICATIONS:
Type: ERD30103-1B
Construction category: D
Operation method: Revolve DIP Action
Terminal form: #PCB Terminal
Mounting: Stick in
Protection: IP40
Note:
Actuating Force:The force required to move the actuator from the free to the operation position
1.1GENERAL CHARACTERISTICS
1.1.1Application This specification is applied to RT-S06A Rocker Switch used for electronic equipment.
1.1.2 Operating temperature range 0℃ to 85℃
1.1.3 Test conditions Unless otherwise specified. The atmospheric conditions for making measurements and tests are as follows
Ambient temperature: 15~35℃
Relative humidity: 45~85%
Air pressure: 86~106kPa (860~1060 mbar)
Should any doubt arise in judgment. tests shall be conducted at the following conditions.
Ambient temperature: 20±2℃
Relative humidity: 60~70%
Air pressure: 86~106kPa (860~1060 mbar)
1.2 Appearance construction and dimensions
1.2.1 Appearance Switch shall have good finishing, and no rust crack or plating failures.
1.2.2 Construction and dimensions Refer to individual product drawing.
1.3. Electrical specifications
|
NO. |
Items |
Test conditions |
Criteria |
|
1.3.1 |
Contact resistance |
Shall be measured at 1KHz SMALL CURRENT(25 mA OR LESS) by voltage drop method after some operations without load. Applied position: Between terminal and terminal |
100mΩ MAX |
|
1.3.2 |
Insulation resistance |
Test voltage: 100VDC, measured after 60 ±5s Applied position: 1)Between terminal and terminal 2)Between terminal and ground |
100MΩ MIN |
1.4. ENVIRONMENT RESISTANCE
|
NO. |
Item |
Test conditions |
Criteria |
|
1.4.1 |
Cold |
After testing at -25±2℃ for 96 h, |
Contact resistance(item 4.1): 100mΩ MAX Insulation resistance (item 4.2): 100MΩ MIN Voltage proof: (item 4.3) No dielectric breakdown shall occur. Operating characteristic (item 5.1): Operating characteristic variety No abnormalities shall be recognized |
|
1.4.2 |
Dry heat |
After testing at 85±2℃ for 96 h, |
|
|
1.4.3 |
Damp heat |
After testing at 40±2℃ and 90-95%RH |
|
|
1.4.4 |
Change of temperature |
After 20 cycles of following conditions |
|
|
1.4.5 |
Salt mist |
Switch shall be checked after following lest. 1) Temperature: 35±2℃ 2) Salt solution: 5±1% (solids by mass) 3) Duration: 24±1h After test, salt deposit |
No remarkable corrosion |
1.5. WELDING CHARACTERISTICS
|
1.5.1 |
Solder ability |
Switch test under such conditions and inspect after. 1）Variable temperature range ：235±5℃； 2）Dip time：3±0.5s； |
The area of dip tin |
|||||||||
|
1.5.2 |
Resistance to |
The switch will be inspect under such conditions below Temperature and impregnated time
|
All of the appearance, |
1.6. ENDURANCE
|
NO. |
Item |
Test condition |
Criteria |
|
1.6.1 |
Life Test |
An actuator shall be with a thrust of no great than 1 times switch power to 3,000 cycles. At a speed of 30 cycles for 1 minutes. |
1) Contact resistance(item 4.1): 100mΩ MAX 2) Life time: 3) 3,000 cycles |
|
1.6.2 |
Stem Strength |
And along the running direcition at apex handle (500g) on the strength test, time is 30 seconds. |
cognized in appearance |
2. DRAWING & DIMENSION:
3.PACKING:
|
3.1 |
Packing material: |
Plastic bag / |
|
3.2 |
Packing number: |
200 pieces per bag |
|
3.3 |
Weight: |
Gross Weight: 8 kg Net Weight: 7 kg |
|
3.4 |
Size: |
40*30*23CM /0.0276㎡ |