+86-0512-62885849

EN
All Categories

Home /Products /Slide Switch

  • /img/ts40-s-swts-4s-cq-e-silde-switch-1p2t-46.jpg

ES40-S-ES-4S-SWC silde switch 1P2T

Series:ES40-S-ES-4S-SWC

Quick Detail:

Type: ES40-S-ES-4S-SWC
RATING: 0.4VA 28VDC MAX
FUNCTION: 1P2T

  • Remarks
  • Applications
  • Technical parameters
Remarks

1.MATERIAL:

NO

name

Material Science

1

Case

Nylon

2

Actuator

Nylon 

3

Frame

Nylon 

4

Terminal

Copper alloygold plated

5

Contact

Copper alloysilver plated

6

Switch support

Copper alloy, tin-lead

7

Loop sealing

rubber

Applications

1.Digital Products: digital camera, digital video and so on;   

2.Remote Control: the remote control of automobile domestic security products;   

3.Communication Products: mobile phone, vehicle-mounted phone, telephone set, building equipment, PDA and so on;  
                                             
4.Homehole appliances: TV set, microwave oven, electric rice cooker, electric fans ,refrigerator,washer;air-conditioning and so on;   
                                                                              
5.Security Products: visual interphone, monitor and so on;   
                      
6.Toys: electric toys and so on;   

7.Computer Products: PC camera and so on;   

8.Exercises Machines: treadmills, massage armchair and so on;                                                                    

9.Medical Device: sphygmomanometer, thermometer, hospital call system and so on;
      
10.Others:  laser pen ,Pointer,Wireless mouse remote control pen,Laser projection pen,page turner,electronic pen;MousePen;overhead projector and so on;

11.Operating switches in all types of electronic equipment such as audio devices, office devices, communication devices, measuring instruments, TVs, video recorders,automotive sets, etc.

12.Household appliances, electric force, telecommunications, machine tool, vessel, textile, printing, Mining machine,  Music Instrument, etc.

Technical parameters

1.DETAIL SPECIFICATIONS:

This specification describes sub-miniature slide switch mainly used as small current and signal switch of electric device with the general required of mechanical and characteristics.

Type: ES40-S-ES-4S-SWC
RATING: 0.4VA 28VDC MAX
FUNCTION: 1P2T

1.1 GENERAL CHARACTERISTICS 

1.1.1 Application                This specification is applied to ES40-S Silde Switch used for electronic equipment.

1.1.2 Operating temperature range     -30℃ + 85℃

1.1.3 Test conditions                Unless otherwise specified. The atmospheric conditions for making measurements and tests are as follows  

Ambient temperature:                       5~35℃

Relative humidity:                           45~85%

Air pressure:                                    86~106kPa (860~1060 mbar)

1.2 Appearance construction and dimensions

1.2.1 Appearance                          Switch shall have good finishing, and no rust crack or plating failures.

1.2.2 Construction and dimensions  Refer to individual product drawing.

1.3 Programmer of test

peculiarity

ITEM

DESCRIPTION

TEST  CONDITION

REQUIREMENTS

电气特性

1.3.1

Visual Examination

By visual examination check without any pressure and testing

There shall be no defect that affect the function of the product

1.3.2

Contact Resistance

(1)To be measured between the two terminals associated with each switch pole.

(2)Measurements shall be made with a 1kHz shall current contact resistance meter.

20mΩ MAX(initial)

1.3.3

Insulation Resistance

500VDC,1min±5sec

1000MΩ  MIN

1.3.4

Dielectric withstanding voltage

1500VAC (50Hz or 60 Hz) shall be applied between all the adjacent terminals and between the terminal and the frame for 1 minute.

There shall be no breakdown or flashover

机械特性

1.3.5

Operating Force

Applied in direction operation

ON→OFF

OFF→ON

 

10N max

1.3.6

Stop Strength

A static load of 30N is applied in the operating direction and pulling direction operated for a period of 30 seconds.

There shall be no sign of damage mechanically

1.3.7

Soldering Heat Resistance

(1) Soldering Temperature:260±5°C

(2) Duration of Solder Immersion:5±1 sec

(3) Frequency of Soldering Process,2 times Max

PCB is 1.6mm in thickness

As show in item2.1.2~2.1.6

耐久性

1.3.8

Operation Life

Measurements shall be made following the test set forth below:

1.5A,250V resistive load

‚Rate of Operation:6~8cycles/minute

ƒCycle of Operation:6000cycles

As show in item 2.1.3~2.1.4

耐候性

1.3.9

Resistance Low Temperature

Following the test set forth below the sample shall be left in normal temperature and humidity conditions for an hour before measurements are made
Temperature:-30±3°C

‚Time:48 hours

As show in item2.1.2~2.1.6

1.3.10

Resistance high Temperature

Following the test set forth below the sample shall be left in normal temperature and humidity conditions for an hour before measurements are made
Temperature:85±3°C

‚Time:48 hours

1.3.11

 

Resistance Humidity


Following the test set forth below the sample shall be left in normal temperature and humidity conditions for an hour before measurements are made
Temperature:40±2°C

‚Relative Humidity:90-95%

ƒTime:48 hours


1.As show in item2.14~2.1.62. Contact Resistance:100mΩ max

3.Insulation Resistance:10MΩ min

1.4 Soldering Condition

■ Condition for soldering

 

■  Manual soldering:

Soldering Temperature

MAX.350℃

Continuous Soldering Time

3秒以下 MAX.3 seconds

■     Precautions in Handling:

1.Care should be exercised so that flux from the upper part of the printed circuit board does not adhere to the switch.

2.Don’t wash switch body.

2. DRAWING & DIMENSION:

Contact Us