EN 
ES
AR
NL
JA
KO
FR
RU
5FS1SWS102MTQES ON-ON SMD slide switch
Series:5FS1SWS102MTQES
Quick Detail:
Type： 5FS1SWS102MTQES
Rating： 3A/120VAC/28VDC, 1A/250VAC
- Remarks
- Applications
- Technical parameters
Remarks
Applications
1.Digital Products: digital camera, digital video and so on;
2.Remote Control: the remote control of automobile domestic security products;
3.Communication Products: mobile phone, vehicle-mounted phone, telephone set, building equipment, PDA and so on;
4.Homehole appliances: TV set, microwave oven, electric rice cooker, electric fans ，refrigerator，washer;air-conditioning and so on;
5.Security Products: visual interphone, monitor and so on;
6.Toys: electric toys and so on;
7.Computer Products: PC camera and so on;
8.Exercises Machines: treadmills, massage armchair and so on;
9.Medical Device: sphygmomanometer, thermometer, hospital call system and so on;
10.Others: laser pen ，Pointer，Wireless mouse remote control pen，Laser projection pen，page turner，electronic pen；MousePen；overhead projector and so on;
11.Operating switches in all types of electronic equipment such as audio devices, office devices, communication devices, measuring instruments, TVs, video recorders，automotive sets, etc.
12.Household appliances, electric force, telecommunications, machine tool, vessel, textile, printing, Mining machine, Music Instrument, etc.
Technical parameters
3. DETAIL SPECIFICATIONS:
Type： 5FS1SWS102MTQES
Rating： 3A/120VAC/28VDC, 1A/250VAC
GENERAL CHARACTERISTICS
Application:This specification is applied to 5FS1 Toggle Switch used for electronic equipment.
Operating temperature range: -40℃ + 85℃
Test conditions : Unless otherwise specified. The atmospheric conditions for making measurements and tests are as follows
Ambient temperature: 15~35℃
Relative humidity: 45~85%
Air pressure: 86~106kPa (860~1060 m bar)
APPEARANCE, STRUCTURE AND DIMENSION
Appearance :Switch shall have good finishing, and no rust crack or plating failures.
Construction and dimensions: Refer to individual product drawing.
4. TEST SEQUENCE:
|
ELECTRIC PERFORMANCE
|
ITEM |
DESCRIPTION |
TEST CONDITIONS |
PERFORMANCE |
|
1 |
Visual Examination |
By Visual Examination check without and out pressure & testing. |
There shall be no defects that affect the serviceability of the product.
|
|
|
2 |
Contact Resistance |
@2-4VDC 100mA. For both silver and gold plated contacts. |
20mΩ Max. |
|
|
3 |
Insulation Resistance |
Measurements shall be made following application of 1000V/ DC 100mA potential across terminals and cover for 1 minute. |
1000MΩ min/1000V. |
|
|
4 |
Dielectric Withstanding Voltage |
1000 VAC(50Hz or 60Hz) 0.5mA shall be applied across terminals and cover for 1 minute. |
There shall be no breakdown or flashover. |
|
MECHANICAL PERFPRMANCE
|
ITEM |
DESCRIPTION |
TEST CONDITIONS |
PERFORMANCE |
|
5 |
Solder Heat Resistance |
①Manual Soldering： Soldering Temperature：Max.350℃ Continuous Soldering Time： Max. 5 seconds. ②WAVE Soldering ： Soldering Temperature:260±5℃. Duration of Solder Immersion: 5 ±1 seconds ③Frequency of Soldering Process 2 times max.(PCB is 1.6mm in thickness) Precautions in Handling Care should be exercised so that flux from the upper part of the printed circuit board does not adhere to the switch. |
①Shall be free from pronounced backlash and falling-off or breakage terminals. ②As shown in item 2~4. |
|
|
6 |
Vibration |
Shall be vibrated in accordance with Method 201A of MIL-STD-202F ①Frequency: 10-55-10Hz in 1-min/cycle. ②Direction: 3 vertical directions including the directions of operation. ③Test time:2 hours each direction. |
Asshowninitem2~4 |
|
|
7 |
Shock |
Shall be shocked in accordance with Method 213B condition A of MIL-STD-202F ①Acceleration; 50g. ②Action time: 11±1m seconds. ③Testing Direction: 6 sides. ④Test Cycle: 3 times in each direction. |
As shown in item 2~4 |
|
|
8 |
Actuation Force |
MODEL-1305N MECHANICAL TEST 500gram 、1000gram、2000gram. |
250±100gf Min
|
|
OPERATING LIFE
|
ITEM |
DESCRIPTION |
TEST CONDITIONS |
PERFORMANCE |
|
9 |
Operating Life
|
Measurements shall be made following the test forth below: ①5A@120VAC resistive load－silver plated. 2A@250VAC resistive load－silver plated. 0.4VA max@ 20VAC max resistive load－gold plated. ②Rate of Operation: 6-8 operation cycles per minute. |
①Dielectric Strength：1000V. ②Insulation Resistance: 1000MΩmin. |
|
|
Mechanical Life Test: 30,000 cycles. |
Contact Resistance: 20mΩMax.
|
|||
|
10 |
Resistance Low Temperature |
Following the test set forth below the sample shall be left in normal temperature and humidity conditions for 1 hour before the measurements are made: ①Temperature:-20±3℃ ②Time:96 hours. |
As shown in item 2~4 |
|
|
11 |
Resistance High Temperature |
Following the test set forth below the sample shall be left in normal temperature and humidity conditions for an hour before the measurements are made: ①Temperature:80±2℃ ②Time:96 hours. |
As shown in item 2~4 |
|
|
12 |
Resistance Humidity |
Following the test set forth below the sample shall be left in normal temperature and humidity conditions for an hour before the measurements are made: ①Temperature:40±2℃ ②Relative Humidity:90~95% ③Time:96 hours. |
①Contact Resistance: 20mΩ Max. ②Insulation Resistance: 1000MΩmin.
|
|
|
13 |
The Salt Testing
|
Following the test set forth below the sample shall be left in normal temperature and humidity conditions for an hour before the measurements are made: ①Temperature:35±2℃. ②The ratio of salt-water：5% ③The spray amout of salt-water： 1~2 ml/h. ④Time:48 hours.
|
The testing standard based on bubble, crack, And magnifying glass with gauge.
|
4. DRAWING & DIMENSION:
