EN 
ES
AR
NL
JA
KO
FR
RU
KAN-J2SWM-1-A latched push button switch with 2 terminals used for mirror
Series:KAN-J2 series
Quick Detail:
Type: KAN-J2SWM-1-A
Construction category: D
Operation method: Push button switch
Configuration: Single-Pole Single -Throw (SPST)
Terminal form: Solder Terminal
Protection: IP40
- Remarks
- Applications
- Technical parameters
Remarks
-
SAFETY APPROVAL & RATING:
Approved Rating
Mark
Reference No.
UL&CUL
15023526003
TUV
16A 12(12)A 8(8)A 250VAC
11002059206
CQC
10(3)A,250VAC 50HZ T85IE4
PARTS LIST:
NO.
quantity
Items
Material
1
1
Housing
PA66
2
1
Actuator
PA66
3
1
Core pin
PA66
4 1 Spring
Steel
5 1 Contact
AgCd0(12)/Cu
6 1 Terminal/contact
Brass silver plated
Note: Returned plastic should not exceed 20%.
Applications
Widely used in home appliance, electronic equipment, automatic machine, communication equipment, car electron, apparatus and instrument, electric motion tool etc.
Rice cooker
Slow cooker
Electric Heating Faucet
Shredder
Computer mouse
Electromagnetic lock
Baby chair
CNC machine tools
Power generator
Test equipment
Elevator
Power tools
Air conditioner
Water heater control panel
Bathroom products
Vacuum cleaner
Kitchen products
Gas valve
Range hood machine
Microwave oven
Pass-through machine
Technical parameters
3.DETAIL SPECIFICATIONS:
Type:KAN-J2SWM-1-A
Construction category:D
Operation method:Push button switch
Configuration:Single-Pole Single -Throw (SPST)
Terminal form:Solder Terminal
Protection:IP40
Ratings 10(3)A 250VAC; 16(4)A 125VAC; 10.1(3)A 250VAC
Withstand voltage 1000VAC,1Min
3.1 General
3.1.1Application This specification is applied to KAN-J2 Power Switch used for electronic equipment.
3.1.2 Operating temperature range 0℃ to +125℃
3.1.3 Test conditions Unless otherwise specified. The atmospheric conditions for making measurements and tests are as follows
Ambient temperature:15~35℃
Relative humidity:45~85%
Air pressure:86~106kPa (860~1060 mbar)
Should any doubt arise in judgment. tests shall be conducted at the following conditions.
Ambient temperature:20±2℃
Relative humidity:60~70%
Air pressure:86~106kPa (860~1060 mbar)
3.2Appearance construction and dimensions
3.2.1 Appearance Switch shall have good finishing, and no rust crack or plating failures.
3.2.2Construction and dimensions Refer to individual product drawing.
3.3. Electrical Characteristics
|
NO. |
Items |
Test conditions |
|
3.3.1 |
Contact resistance |
The contact resistance should be 50mΩ(Max). |
|
3.3.2 |
Insulation resistance |
It is measured with 500V DC 1minute should be 100MΩ(Min). |
|
3.3.3 |
Dielectric strength |
AC 2000V,1min.(before endurance test) AC 3000V,1min.(after endurance test) |
3.4 Mechanical Characteristics
|
Item |
Description |
Test Conditions |
|
1 |
Operating Force |
720gf±140 |
|
2 |
Operating Life |
The mechanical life all of 10 000 cycles |
|
3 |
Contact Spacing |
Min. 3.0mm (IEC61058) |
3.5Durability
|
NO. |
Item |
Test condition |
Criteria |
||||||||||||||||||
|
3.5.1 |
Endurance (According to UL61058) |
6.5A 250VAC; 13A 125VAC Switch shall be operated according to following sequence (Test1~Test2)
Voltage proof(Cut-off current:0.5mA) 6.5A 250VAC; 13A 125VAC Switch shall be operated 50,000 cycles at 15-20 cycles/min. Test voltages shall be applied for 1 min |
Insulation resistance(item 4.2): 50MΩ MIN Voltage proof: Terminal and ground:1000VAC No dielectric breakdown shall occur. Operating characteristic (item 5.1): Operating characteristic variety Within ±20% of specifiedvalue . 6000 cycles temperature rise:45℃MAX; 10,000 cycles temperature rise:55℃ MAX;
No abnormalities shall be recognized in appearance and construction |
||||||||||||||||||
|
3.5.2 |
Endurance (According to EN61058-1 /IEC61058-1) |
10(3)A 250VAC Switch shall be operated 10,000 cycles at 15~20 cycles/min Voltage proof(Cut-off current:0.5mA) Test voltages shall be applied for 1 min. |
Insulation resistance(item 4.2): 50MΩ MIN Voltage proof: Terminal and terminal:750VAC Terminal and ground:1500VAC No dielectric breakdown shall occur. Operating characteristic (item 5.1): Operating characteristic variety Within ±20% of specifiedvalue . Temperature rise:55℃ MAX No abnormalities shall be recognized in appearance and construction |
3.6. SOLDERING
Solder ability and Resistance to sold heat according to IEC 68-2-20
4. DRAWING & DIMENSION
5. PACKING:
|
5.1 |
Packing material: |
Plastic box / |
|
5.2 |
Packing number: |
100 pieces per bag |
|
5.3 |
Weight: |
Gross Weight: 17.2kg Net Weight: 14.2kg |
|
5.4 |
Size: |
57.0 x 26.0 x 32.0 CM / 0.045CBM |