EN 
ES
AR
NL
JA
KO
FR
RU
LA160-12AYSW-11 illuminated push button switch with 5 pins
Series:PB12 series
Quick Detail:
Type: LA160-12AYSW-11
Construction category: D
Operation method: Push button switch
Configuration: Single-Pole Double -Throw (SPDT)
Terminal form: Solder Terminal
Protection: IP40
- Remarks
- Applications
- Technical parameters
Remarks
SAFETY APPROVAL & RATING:
|
Approved Rating |
Mark |
Reference No. |
|
|
UL&CUL |
|
|
|
VDE |
|
|
0.7A 110VAC; 0.5A 220VAC; 0.1A 220VDC |
CQC |
2011010305454397 |
Applications
Enormous remote
controller and portable remote controller
Instrumentation
Medical equipment
Telecommunications and networking equipment
Computers & peripherals
Instrumentation and controls
Industrial electronic equipment
Industrial remote controller
Medical Equipment
Communication
Outdoor Controls
Public building, Home security, Business building, Industrial equipment…etc.
Technical parameters
3.DETAIL SPECIFICATIONS:
Type:LA160-12AYSW-11
Construction category:D
Operation method:Push button switch
Configuration:Single-Pole Double -Throw (SPDT)
Terminal form:Solder Terminal
Protection:IP40
Ratings: 0.7A 110VAC; 0.5A 220VAC; 0.1A 220VDC
Withstand voltage: 1000VAC,1Min
3.1 General
3.1.1Application This specification is applied to LA160 Push button Switch used for electronic equipment.
3.1.2 Operating temperature range -20℃ to +55℃
3.1.3 Test conditions Unless otherwise specified. The atmospheric conditions for making measurements and tests are as follows
Ambient temperature:15~35℃
Relative humidity:45~85%
Air pressure:86~106kPa (860~1060 mbar)
Should any doubt arise in judgment. tests shall be conducted at the following conditions.
Ambient temperature:20±2℃
Relative humidity:60~70%
Air pressure:86~106kPa (860~1060 mbar)
3.2Appearance construction and dimensions
3.2.1 Appearance Switch shall have good finishing, and no rust crack or plating failures.
3.2.2Construction and dimensions Refer to individual product drawing.
3.3. Electrical Characteristics
|
NO. |
Items |
Test conditions |
|
3.3.1 |
Contact resistance |
The contact resistance should be 50mΩ(Max). |
|
3.3.2 |
Insulation resistance |
It is measured with 500V DC 1minute should be 100MΩ(Min). |
|
3.3.3 |
Dielectric strength |
AC 2000V,1min.(before endurance test) AC 1500V,1min.(after endurance test) |
3.4 Mechanical Characteristics
|
Item |
Description |
Test Conditions |
|
1 |
Operating Force |
300gf±100 |
|
2 |
Operating Life |
The mechanical life all of 1000 000 cycles |
|
3 |
Contact Spacing |
Min. 3.0mm (IEC61058) |
3.5Durability
|
NO. |
Item |
Test condition |
Criteria |
||||||||||||||||||
|
3.5.1 |
Endurance (According to UL61058) |
0.7A 110VAC; 0.5A 220VAC; 0.1A 220VDC Switch shall be operated according to following sequence (Test1~Test2)
Voltage proof(Cut-off current:0.5mA) 0.7A 110VAC; 0.5A 220VAC; 0.1A 220VDC Switch shall be operated 100,000 cycles at 15-20 cycles/min. Test voltages shall be applied for 1 min |
Insulation resistance(item 4.2): 50MΩ MIN Voltage proof: Terminal and ground:1000VAC No dielectric breakdown shall occur. Operating characteristic (item 5.1): Operating characteristic variety Within ±20% of specifiedvalue . 6000 cycles temperature rise:45℃MAX; 10,000 cycles temperature rise:55℃ MAX;
No abnormalities shall be recognized in appearance and construction |
||||||||||||||||||
|
3.5.2 |
Endurance (According to EN61058-1 /IEC61058-1) |
0.7A 110VAC; 0.5A 220VAC; 0.1A 220VDC Switch shall be operated 100,000 cycles at 15~20 cycles/min Voltage proof(Cut-off current:0.5mA) Test voltages shall be applied for 1 min. |
Insulation resistance(item 4.2): 50MΩ MIN Voltage proof: Terminal and terminal:750VAC Terminal and ground:1500VAC No dielectric breakdown shall occur. Operating characteristic (item 5.1): Operating characteristic variety Within ±20% of specifiedvalue . Temperature rise:55℃ MAX No abnormalities shall be recognized in appearance and construction |
3.6. SOLDERING
Solder ability and Resistance to sold heat according to IEC 68-2-20
4. DRAWING & DIMENSION:
5. PACKING:
|
5.1 |
Packing material: |
Plastic box / |
|
5.2 |
Packing number: |
100 pieces per bag |
|
5.3 |
Weight: |
Gross Weight: kg Net Weight: kg |
|
5.4 |
Size: |
57.0 x 26.0 x 32.0 CM / 0.045CBM |