+86-0512-62885849

EN
All Categories

Home /Products /Slide Switch

  • /img/mk12c02sw-pb--silde-switch-1p2t.jpg

MK12C02SW-PB -silde switch 1P2T

Series:MK12C02SW-PB

Quick Detail:

Type:MK12C02SW-PB

RATING:DC 12V 100mA

FUNCTION:SPDT   

  • Remarks
  • Applications
  • Technical parameters
Remarks

1. PARTS LIST:

NO.

Quantity

Name

Material

Color

1

1

KNOB

PA46

Black

2

1

Cover board

SUS301/304

Silvery

3

1

Plastic Base

LCP

Black

4

3

Terminal

phosphor copper

Silvery

5

1

CONTACT CLIP

phosphor copper

Silvery

 

2. PACKING:

 

2.1

Label material after packing,3000pcs per tray.

2.2

3 trays per box ,3*3000=9000pcs per box.

5 boxes per case, 5*9000=45000pcs per case.

2.3

Seal the box and label it.

Applications

1.Digital Products: digital camera, digital video and so on;   

2.Remote Control: the remote control of automobile domestic security products;   

3.Communication Products: mobile phone, vehicle-mounted phone, telephone set, building equipment, PDA and so on;  
                                             
4.Homehole appliances: TV set, microwave oven, electric rice cooker, electric fans ,refrigerator,washer;air-conditioning and so on;   
                                                                              
5.Security Products: visual interphone, monitor and so on;   
                      
6.Toys: electric toys and so on;   

7.Computer Products: PC camera and so on;   

8.Exercises Machines: treadmills, massage armchair and so on;                                                                    

9.Medical Device: sphygmomanometer, thermometer, hospital call system and so on;
      
10.Others:  laser pen ,Pointer,Wireless mouse remote control pen,Laser projection pen,page turner,electronic pen;MousePen;overhead projector and so on;

11.Operating switches in all types of electronic equipment such as audio devices, office devices, communication devices, measuring instruments, TVs, video recorders,automotive sets, etc.

12.Household appliances, electric force, telecommunications, machine tool, vessel, textile, printing, Mining machine,  Music Instrument, etc.

Technical parameters

1.DETAIL SPECIFICATIONS:

1.1 GENERAL CHARACTERISTICS 

1.1.1 Application                This specification is applied to SS12F Silde Switch used for electronic equipment.

1.1.2 Operating temperature range     -10℃ + 50℃

1.1.3 Test conditions                Unless otherwise specified. The atmospheric conditions for making measurements and tests are as follows  

Ambient temperature:                       5~35℃

Relative humidity:                           45~85%

Air pressure:                                    86~106kPa (860~1060 mbar)

1.2 Appearance construction and dimensions

1.2.1 Appearance                          Switch shall have good finishing, and no rust crack or plating failures.

1.2.2 Construction and dimensions  Refer to individual product drawing.

1.3. Electrical specifications

NO.

ITEM

TEST CONDITIONS

PERFORMANCE

1.3.1

CONTACT

RESISTANCE

MEASURED AT 1 KHz SMALL CURRENT(100 mA OR LESS)

100mΩ MAX

1.3.2

INSULATION

RESISTANCE

APPLY A VOLTAGE OF 100V DC SHALL BE APPLIED FOR 1 MIN AFTER

WHICH MEASUREMENT BE MADE:

(1) BETWEEN TERMINAL.

(2) BETWEEN INDIVIDUAL TERMINAL AND FRAME.

50MΩ MIN

1.3.3

DIELECTRIC

STRENGTH

AC 250V (50~60Hz) FOR 1 MIN TRIP CURRENT: 0.5 mA

(1) BETWEEN TERMINAL.

(2) BETWEEN INDIVIDUAL TERMINAL AND FRAME.

WITHOUT DAMAGE TO PARTS ARCING OR

BREAKDOWN ETC.

1.4.  MECHANICAL CHARACTERISTICS

NO.

ITEM

TEST CONDITIONS

PERFORMANCE

1.4.1

OPERATING FORCE

LATERAL PUSH

PUSH FORCE:  170gf±50gf

1.4.2

TRAVEL

IN THE HORIZONTAL DIRECTION SWITCH HANDLE OPRATION,WITH AN EQUAL TO 1TIMES THE THRUST OF THE SWITSH FORM ONE POSITION TO THE NEXT GEAR, MOVING DISTANCE MEASURING HANDLE.

1.5mm±0.2mm

1.4.3

STEM STRENGTH

AND ALONG THE RUNNING DIRECTION AT APEX HANDLE(4N)ON THESTRENGTH TEST,TIME IS 30 SECONDS.

THE LEVER SHALL HAVE NO

SERIOUS DEFORMATION AND

FUNCTION IS NORMALLY.

1.5. DURABILITY

NO.

ITEM

TEST CONDITIONS

PERFORMANCE

1.5.1

LIFE TEST

AN ACTUATOR SHALL BE WITH A THRUST OF NO GREAT THAN 1 TIMES SWITH POWER TO 10000 CYCLES AT A SPEED OF 30 CYCLES FOR 1 MIN.

1)CONTACT RESISTANCE

SHALL BE ≥300mΩ.

2)LIFETIME:10000次

1.5.2

HEAT RESISTANCE

THE SWITCH SHALL BE STORED AT A TEMPERATURE OF 85±2℃ FOR 96 HOURS.AND THEN IT SHALL BE SUBJECTED TO THE CONTROLLED RECOVERY CONDITIONS FOR 1 HOUR AFTER WHICH

MEASUREMENT SHALL BE MADE.

THERE SHALL BE NO DAMAGE ONAPPEARANCE.

MECHANICAL AND ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED.

1.5.3

COLD RESISTANCE

THE SWITCH SHALL BE STORED AT A TEMPERATURE OF-25±3℃ FOR 96 HOURS.AND THEN IT SHALL BE SUBJECTED TO THE CONTROLLED RECOVERY CONDITIONS FOR 1 HOUR AFTER WHICH

MEASUREMENT SHALL BE MADE.

1.5.4

HUMIDITY TEST

THE SWITCH SHALL BE STORED AT A TEMPERATURE OF 40±2℃ AND A HUMIDITY OF 80% TO 85% FOR 96 Hr. THEN THE JACK SHALL BE MAINTAINED AT STANDARD ATMOSPHERIC CONDITION FOR 1 Hr FOR OTHER PROCEDURES.

1.5.5

TEMPERATURE CYCLE

DECREASE FROM 25℃ TO -25℃ IN 30 MINUTES; THEN INCREASE FROM -25℃ TO 85℃ TO COMPLETE 0NE CYCLE.TOTAL 5 CYCLES. MEASURE AFTER 1 HOURS 0F RECOVERY IN STANDARD ATMOSPHERIC CONDITIONS.

 

THERE SHALL BE NO DAMAGE ONAPPEARANCE. MECHANICAL AND  ELECTRICAL CHARACTERISTICS SHALLBE SATISFIED.

1.5.6

24 HOUR SALT SPRAY TEST

1)SALT SOLUTION MASS CONENTRATION(5 + 0.1)%; PH VALUE 6.5~7.2;SALT WATER BUCKET TEMPERATURE 35 + 2℃,SPRAY PRESSURE 0.12MPa FOR 24 HOURS. SALT SPRAY COLLECTION 1.0~2.0ml/ (80c㎡.H).

2) SALT SEDIMENT WATER WASHED OUT AFTER TEST AFTER DRY DRYING AFTER STANDING FOR 30 MINUTES TO DETECT.

NO REMARKABLE CORROSION SHALL BE RECOGNIZED IN METAL PART

1.6.  SOLDERING PROPERTIES

2.6.1

SOLDERING CONDITIONS

1)HAND SOLDERING:

DIVCE:SOLDER IRON.

270℃MAX.,3 sec Max

2) REFLOW SOLDERING:≤250℃

 

THERE SHALL BE NO DAMAGE ONAPPEARANCE. MECHANICAL AND ELECTRICAL

CHARACTERISTICS SHALL BE SATISFIED.

2. DRAWING & DIMENSION:

3. CIRCUIT & DIAGRAM:

Contact Us