1MS4SWT8B13M2QES-5 1Ways 3 Pins Metal monentry ON-OFF-ON Rocker Arms Toggle Switch
Series:1MS4SWT8B13M2QES-5
Quick Detail:
Type: 1MS4SWT8B13M2QES-5
Rating: 5A/120VAC/28VDC, 2A/250VAC
Function: 1P2T
- Remarks
- Applications
- Technical parameters
Remarks
PART LIST:
NO |
quantity |
name |
Material Science |
1 |
1 |
Case |
Phthalate(DAP)(UL94V-0) |
2 |
1 |
Actuator |
Brass, chrome plated. |
3 |
1 |
Bushing |
Brass, nickel plated. |
4 |
1 |
Housing |
Stainless Steel. |
5 |
3 |
Contact /Terminal |
Brass, gold plated |
6 |
1 |
Switch Support |
Brass, tin plated |
Applications
1.Digital Products: digital camera, digital video and so on;
2.Remote Control: the remote control of automobile domestic security products;
3.Communication Products: mobile phone, vehicle-mounted phone, telephone set, building equipment, PDA and so on;
4.Homehole appliances: TV set, microwave oven, electric rice cooker, electric fans ,refrigerator,washer;air-conditioning and so on;
5.Security Products: visual interphone, monitor and so on;
6.Toys: electric toys and so on;
7.Computer Products: PC camera and so on;
8.Exercises Machines: treadmills, massage armchair and so on;
9.Medical Device: sphygmomanometer, thermometer, hospital call system and so on;
10.Others: laser pen ,Pointer,Wireless mouse remote control pen,Laser projection pen,page turner,electronic pen;MousePen;overhead projector and so on;
11.Operating switches in all types of electronic equipment such as audio devices, office devices, communication devices, measuring instruments, TVs, video recorders,automotive sets, etc.
12.Household appliances, electric force, telecommunications, machine tool, vessel, textile, printing, Mining machine, Music Instrument, etc.
Technical parameters
1. DETAIL SPECIFICATIONS:
Type: 1MS4SWT8B13M2QES-5
Rating: 5A/120VAC/28VDC, 2A/250VAC
Function: 1P2T
1.1 OPERATING CHARACTERISTICS
NO. |
ITEM |
TEST CONDITIONS |
PERFORMANCE |
1.1.1 |
Operating Force |
The test point is 3mm away from the rubber handle. After three times, the test is carried out. |
400gf±100gf |
1.1.2 |
Terminal Strength |
In the front row of feet, any square type plus (500gf) strength test will take 15 seconds. |
There are no cracks, loosening and other abnormalities in the terminals to meet the mechanical and electrical properties. |
1.1.3 |
Shank strength |
The force of 1Kgf is applied at the front of the handle, and the displacement should be fixed along the direction of the mark. |
There is no serious deformation of the handle, and it can work normally. |
Actuating Force:
The force required to move the actuator from the free to the operation position
1.2 GENERAL CHARACTERISTICS
1.2.1 Application:This specification is applied to 1MS4 Toggle Switch used for electronic equipment.
1.2.2 Operating temperature range: -40℃ + 85℃
1.2.3 Test conditions : Unless otherwise specified. The atmospheric conditions for making measurements and tests are as follows
Ambient temperature: 15~35℃
Relative humidity: 45~85%
Air pressure: 86~106kPa (860~1060 mbar)
1.3 APPEARANCE, STRUCTURE AND DIMENSION
1.3.1 Appearance :Switch shall have good finishing, and no rust crack or plating failures.
1.3.2 Construction and dimensions: Refer to individual product drawing.
1.4 Electrical specifications
NO. |
ITEM |
TEST CONDITIONS |
PERFORMANCE |
1.4.1 |
CONTACT RESISTANCE |
The 2-4VDC is tested under tiny current (below 100mA), silver plated or gold plated. |
10mΩ MAX |
1.4.2 |
INSULATION RESISTANCE |
Measurements shall be made following application of 1000V/DC 100mA potential across terminals and cover for 1 minute. |
1000MΩ MIN |
1.4.3 |
Pressure resistance |
1000V AC(50Hz or 60Hz)0.5mA shall be applied across terminals and cover for 1minute. |
There shall be no breakdown or flashover. |
1.5 Endurance
NO. |
ITEM |
TEST CONDITIONS |
PERFORMANCE |
1.5.1 |
Life Test |
Measurement under the following test: (1) 5A 120VAC Resistive load - Plate with silver 2A 250VAC Resistive load - Plate with silver 0.4A 20VAC Resistive load - Plate with gold (2)Operating frequency:The frequency of 6-8 times per minute (3)Electrical life 6,000 make-and-break cycles. (4)Mechanical life 40,000 make-and-break cycles. |
(1) contact resistance:10 mΩ MAX (2) insulation resistance: 1000 MΩ MIN (3) Insulation strength:1000V (4) After testing, the appearance is free from damage and meets mechanical properties. |
1.5.2 |
Solder heat resistance |
①Manual Soldering: Soldering Temperature:Max.350℃ Continuous Soldering Time: Max. 5 seconds. ②WAVE Soldering : Soldering Temperature:260±5℃. Duration of Solder Immersion: 5 ±1 seconds
③Frequency of Soldering Process 2 times max.(PCB is 1.6mm in thickness) Precautions in Handling Care should be exercised so that flux from the upper part of the printed circuit board does not adhere to the switch. |
①Shall be free from pronounced backlash and falling-off or breakage terminals. ②As shown in item 3.4. |
1.5.3 |
Resistance Humidityt |
Following the test set forth below the sample shall be left in normal temperature and humidity conditions for an hour before the measurements are made: Temperature:40±2℃ Relative Humidity:90~95% Time:96 hours. |
As shown in item 3.4. |
1.5.4 |
Resistance High Temperature |
Following the test set forth below the sample shall be left in normal temperature and humidity conditions for an hour before the measurements are made: Temperature:85±2℃ Time:96 hours. |
|
1.5.5 |
Resistance Low Temperature |
Following the test set forth below the sample shall be left in normal temperature and humidity conditions for 1 hour before the measurements are made: Temperature:-40±3℃ Time:96 hours. |
|
1.5.6 |
The Salt Testing |
Following the test set forth below the sample shall be left in normal temperature and humidity conditions for an hour before the measurements are made: Temperature:35±2℃ The ratio of salt-water:5% The spray amount of salt- water: 1~2 ml/h. Time:48 hours. |
The testing standard based on bubble, crack, And magnifying glass with gauge. |
1.6 SAFEKEEPING METHOD:
(1)If the product is not used immediately, it should be kept at normal temperature without direct sunlight and corrosive gases.
In the environment. But we recommend that we use it as soon as 6 months.
(2)Put the finished products in plastic bags and seal them in the same environment as soon as possible, and use them as soon as possible. Do not overlay excess when saved in order to prevent the pressure from breaking.
(3)Do not overlay excess when saved in order to prevent the pressure from breaking.
1.7 SAFEKEEPING METHOD:
(1)If the product is not used immediately, it should be kept at normal temperature without direct sunlight and corrosive gases.
In the environment. But we recommend that we use it as soon as 6 months.
(2)Put the finished products in plastic bags and seal them in the same environment as soon as possible, and use them as soon as possible. Do not overlay excess when saved in order to prevent the pressure from breaking.
(3)Do not overlay excess when saved in order to prevent the pressure from breaking.