+86-0512-62885849

EN
All Categories

Home /Products /Push Button Switch /General Push Button Switch

  • /img/ps707-91770984-push-button-4-pins-switch-77mm-pushbutton-switch-with-direction-marking.jpg

PS707-91770984 push button 4 pins switch 7×7mm pushbutton switch with direction marking

Series:PS707 series

Quick Detail:

Type: PS707-91770984
Construction category: D
Operation method: Push button switch
Configuration: Single-Pole Double-Through (SPDT)
Terminal form: Solder Terminal
Protection: IP40

  • Remarks
  • Applications
  • Technical parameters
Remarks

PARTS LIST:

NO.

quantity

Items

Material

1

1

guide core

POM

2

1

cover

POM

3

1

crochet hook

steel wire

4 1

case

PBT

5 1

spring

steel wire

6 1

spring sheet

PHOR contact side silver plating

7 1

terminal

brass silver plating

Note: Returned plastic should not exceed 20%.

Applications

Widely used in home appliance, electronic equipment, automatic machine, communication equipment, car electron, apparatus and instrument, electric motion tool etc.
Rice cooker
Slow cooker
Electric Heating Faucet
Shredder
Computer mouse
Electromagnetic lock
Baby chair
CNC machine tools
Power generator
Test equipment
Elevator
Power tools
Air conditioner
Water heater control panel
Bathroom products
Vacuum cleaner
Kitchen products
Gas valve
Range hood machine
Microwave oven
Pass-through machine

Technical parameters

3.DETAIL SPECIFICATIONS:
Type:PS707-91770984
Construction category:D
Operation method:Push button switch
Configuration:Single-Pole Double-Through (SPDT)
Terminal form:Solder Terminal
Protection:IP40
Ratings: DC30V 0.1A
3.1  General
3.1.1Application This specification is applied to KAN-J4 Power Switch used for electronic equipment.
3.1.2 Operating temperature range -10℃ to +70℃                                
3.1.3  Test conditions Unless otherwise specified. The atmospheric conditions for making measurements and tests are as follows
Ambient temperature:15~35℃
Relative humidity:45~85%
Air pressure:86~106kPa (860~1060 mbar)
Should any doubt arise in judgment. tests shall be conducted at the following conditions.
Ambient temperature:20±2℃
Relative humidity:60~70%
Air pressure:86~106kPa (860~1060 mbar)
3.2Appearance construction and dimensions
3.2.1 Appearance Switch shall have good finishing, and no rust crack or plating failures.
3.2.2Construction and dimensions Refer to individual product drawing.

3.3. Electrical Characteristics

NO.

Items

Test conditions

3.3.1

Contact resistance

The contact resistance should be 100mΩ(Max).

3.3.2

Insulation resistance

It is measured with 500V DC 1minute should be 100MΩ(Min).

3.3.3

Dielectric strength

AC 250V,1min.(before endurance test)

 AC250V,1min.(after endurance test)

 

3.4 Mechanical Characteristics

Item

Description

Test Conditions

1

Operating Force

140gf±50

2

Operating Life

The mechanical life all of 10 000 cycles

3

Contact Spacing

Min. 3.0mm (IEC61058)

 

3.5Durability

NO.

Item

Test condition

Criteria

3.5.1

Endurance

DC30V 0.1A

Switch shall be operated according to following sequence

(Test1~Test2)

 

Voltage

Current

Power factor

Operation rate

Number of operation

Test1

30V

0.1A

0.75-0.8

10-20

cycles/min

50000cycles

Test2

30V

0.1A

0.75-0.8

10-20

cycles/min

50000cycles

Voltage proof(Cut-off current:0.5mA)

DC30V 0.1A

Switch shall be operated 10,000 cycles at 10-20 cycles/min.

Test voltages shall be applied for 1 min

Insulation resistance(item 4.2):

50MΩ MIN

Voltage proof:

Terminal and ground:1000VAC

No dielectric breakdown shall occur.

Operating characteristic (item 5.1):

Operating characteristic variety

Within ±20% of specifiedvalue .

6000 cycles temperature rise:45MAX;

10,000 cycles temperature rise:55 MAX;

 

No abnormalities shall be recognized in appearance and construction

3.5.2

Endurance


DC30V 0.1A

Switch shall be operated 10,000 cycles at 10~20 cycles/min

Voltage proof(Cut-off current:0.5mA)

Test voltages shall be applied for 1 min.

Insulation resistance(item 4.2):

50MΩ MIN

Voltage proof:

Terminal and terminal:750VAC

Terminal and ground:1500VAC

No dielectric breakdown shall occur.

Operating characteristic (item 5.1):

Operating characteristic variety

Within ±20% of specifiedvalue .

Temperature rise:55 MAX

No abnormalities shall be recognized in appearance and construction


3.6. SOLDERING
Solder ability and Resistance to sold heat according to IEC 68-2-20


4. DRAWING & DIMENSION:



5. PACKING:

5.1

 Packing material:

Plastic box /
Double-layers paper carton

5.2

 Packing number:

500 pieces per bag
8 bags per inner carton
3 inner cartons per shipping carton
Each shipping carton 12000 pieces

5.3

Weight:

Gross Weight:   5.35 kg

Net Weight:      5.05  kg

5.4

 Size:

57.0 x 26.0 x 32.0 CM / 0.045CBM

Contact Us