+86-0512-62885849

EN
All Categories

Home /Products /Push Button Switch /General Push Button Switch

  • /img/ps808-dpdt-push-button-switch-good-quality-for-equipment-with-6-pins-on-off.jpg

PS808 DPDT push button switch good quality for Equipment with 6 pins ON-OFF

Series:PS808 series

Quick Detail:

Type: PS808
Construction category: D
Operation method: Push button switch
Configuration: Double-Pole Double-Through (DPDT)
Terminal form: Solder Terminal
Protection: IP40

  • Remarks
  • Applications
  • Technical parameters
Remarks

P

PARTS LIST: 

NO.

quantity

Items

Material

1

1

 guide core

POM

2

1

 cover

POM

3

1

 crochet hook

 steel wire

4

1

 case

PBT

5

1

 spring

 steel wire

6

1

  Injection terminal

PA66

7

1

spring sheet

  phosphor bronze

8

1

 terminal

 brass

RoHS: 2002/95/ EC

Note: Returned plastic should not exceed 20%.

Applications

Widely used in home appliance, electronic equipment, automatic machine, communication equipment, car electron, apparatus and instrument, electric motion tool etc.
Rice cooker
Slow cooker
Electric Heating Faucet
Shredder
Computer mouse
Electromagnetic lock
Baby chair
CNC machine tools
Power generator
Test equipment
Elevator
Power tools
Air conditioner
Water heater control panel
Bathroom products
Vacuum cleaner
Kitchen products
Gas valve
Range hood machine
Microwave oven
Pass-through machine

Technical parameters

3. DETAIL SPECIFICATIONS:
Type: PS 808
Construction category: D type
Operation method:Gear shifting
Configuration:Single-Pole Double-Through (SPDT)
Terminal form:Solder Terminal
Mounting:Whole embedding
Protection:Comply with  IP40
3.1 OPERATING CHARACTERISTICS
3.2 General
Rating Value:DC30V 0.1A
3.2.1 Application This specification is applied to1MS3 T8-XH SERIES Switch used for electronic instrument panel.
3.2.2 Operating Temperature Range -10 ℃~+70℃;  Store Temperature Range: -20℃~80℃
3.2.3 Test Conditions     Unless otherwise specified. The atmospheric conditions for making measurements and
tests are as follows:
Ambient temperature:5~35℃
Relative humidity:45~85%
Air pressure:8.6~10.6kPa (860~1060 mbar)
3.3Appearance construction and dimensions
3.3.1 Appearance Switch shall have good finishing, and no rust crack or plating failures.
3.3.2 Construction and dimensions Refer to individual product drawing.

3.4. Electronic characteristics

NO.

Items

Test conditions

Criteria

3.4.1

Contact resistance

 

Measured at low current (100mA or less).

100mΩ MAX

3.4.2

Insulation resistance

 

Measurement shall be made between adjacent terminals, between terminal and shell(DC 500V)

100MΩ MIN

3.4.3

Voltage proof

 Apply certain voltage (50-60Hz,  AC 500V) for 1 minute between adjacent contacts of the connector with 2mA leakage sensitivity.

 

No arcing , break- down and damaging insulation.

 

3.5.  Mechanical characteristic

Characteristics

Units

Standards

Requirements

Actuating Force

N

 Operate the keystoke of the switch vertically, and then increase press strength gradually, Measured maximum operation force while the travel of the switch is full.

See Drawing

 Full travel

mm

Operate the keystoke of the switch vertically, the travel distance of keystoke moving from its free position to maximum moving distance shall be measurement.

See Drawing

Static Strength

 

Placing the switch such that the direction of switch operation is vertical, a static load of  3 kgf shall be applied in the direction of stem operation for a period of 60 seconds.

There shall be no sign of damage mechanically and electrically.

 

4. Test Sequence:

1

Operating Life

DC12V 50mA. The switch would be operated continuously by auto machine at maximum rate of 60 cycles per hours on conaition that the voltage is 12V and the current is 50mA

 

 Life test:100.000cycles After test: Contact resistance: 500mΩMax Insulation resistance: 10MΩ Min Operating force:  Change should be within  ±50% of specified value. No abnormalities shall  be recognized in  appearance and  construction

2

Resistance to soldering heat

Terminals shall be dipped in the solder bath at 260±5℃ for 3± 1 seconds without additional force for

Appearance should be not damaged,electrical and mechanical characteristics shall be satisfied.

3

 Solder ability Tes

The top of the terminals shall be dipped in the solder bath at  230±5℃ for 5±1 seconds.

 Ninety-five percent of terminals shall be dipped.

4

 Resistance to Heat Tes

 

The switch shall be stored at a temperature of 80±2℃ for 96 hours, Measurements shall be made after it be subjected to the standard conditions for 1 hour.

Appearance,construction and item 3.1,3.2 shall be satisfied.

Contact resistance: 200mΩ Max

Insulation resistance:50MΩMin

5

The SaltTesting

 The switch shall be checked after following test: 1.Temperature: 35±5ºC 2.Salt solution: 5±1%(Solids by mass)  3.Duration: 24 hours, 4.After immersing, salt deposit shall be removed by running water.

The testing standard based on bubble, crack, and magnifying glass with gauge.

6

 Resistance to Cold Test

 

The switch shall be stored at a temperature of -25±3℃ for 96 hours, Measurements shall be made after it be subjected to the standard conditions for 1 hour.

Appearance,construction and item 3.1,3.2 shall be satisfied.

Contact resistance: 200mΩ Max

Insulation resistance:50MΩMin

7

Resistance to Humidity Test

 

The switch shall be stored at a temperature of 40±2℃,relative humidity 90~96% for 96 hours, Measurements shall be made after it be subjected to the standard conditions for 1 hour (Wipe out water drip)

Appearance,construction and item 3.1,3.2 shall be satisfied.

Contact resistance: 200mΩ Max

Insulation resistance:50MΩMin


5. Precautions in Handling
Care should be exercised so that flux from the upper part of the printed circuit
board does not adhere to the switch.

6. DRAWING & DIMENSION:




 

7. PACKING:  

8.1

Packing material:

Plastic box /

Five -layers paper carton

8.2

Packing number:

500pcs/bag, 2bags in a box  , 4 box in a small cargo,   4000pcs/small cargo

3 small cargo/ big cargo, 12,000 PCS / big cargo

8.3

Weight:

Gross Weight:  5.35 kg

Net Weight:    5.05 kg

8.4

Size:

57x26x32      cm

Contact Us