EN 
ES
AR
NL
JA
KO
FR
RU
SW10-DS-05R-T SWITECH 5 Positions DIP type DIP Switch with flat bottom used for household appliances, industrial control equipment, and smart home system
Series:SW10-DS-05R-T
Quick Detail:
Type: SW10-DS-05R-T
Operation method: DIP Switch
Comply with: ■IP40 □IP65 □IP67 □IP68
Rating: DC 50V 0.1A
- Remarks
- Applications
- Technical parameters
Remarks
-
PARTS LIST:
ITME
QUANTI
DESC
MATERIALS
1
1
ACTUATOR
THERMOPLASTIC PBT UL 94V-0
2
1
COVER
THERMOPLASTIC PBT UL 94V-0
3
1
CONTACT
PHOSPHOR BRONZE
4
1
TERMINAL
BRONZE
5
1
BASE
THERMOPLASTIC PBT UL 94V-0
Applications
1.Digital Products: digital camera, digital video and so on;
2.Remote Control: the remote control of automobile domestic security products;
3.Communication Products: mobile phone, vehicle-mounted phone, telephone set, building equipment, PDA and so on;
4.Homehole appliances: TV set, microwave oven, electric rice cooker, electric fans ，refrigerator，washer;air-conditioning and so on;
5.Security Products: visual interphone, monitor and so on;
6.Toys: electric toys and so on;
7.Computer Products: PC camera and so on;
8.Exercises Machines: treadmills, massage armchair and so on;
9.Medical Device: sphygmomanometer, thermometer, hospital call system and so on;
10.Others: laser pen ，Pointer，Wireless mouse remote control pen，Laser projection pen，page turner，electronic pen；MousePen；overhead projector and so on;
11.Operating switches in all types of electronic equipment such as audio devices, office devices, communication devices, measuring instruments, TVs, video recorders，automotive sets, etc.
12.Household appliances, electric force, telecommunications, machine tool, vessel, textile, printing, Mining machine, Music Instrument, etc.
Technical parameters
2.1 GENERAL CHARACTERISTIC:
2.1.1 Application This specification is applied to DIP Switch used for electronic equipment.
2.1.2 Operating temperature range -40℃ +85℃
2.1.3 Test conditions
Unless other specified. The atmospheric conditions for making measurements and tests are as follows:
Ambient temperature: 5~35℃
Relative humidity: 45~85%
Air pressure: 86~106kPa (860~1060 mbar)
Should any doubt arise in judgment. tests shall be conducted at the following conditions.
Ambient temperature: 20±2℃
Relative humidity: 60~70%
Air pressure: 86~106kPa (860~1060 mbar)
2.2 Appearance construction and dimension:
2.2.1 Appearance
Switch shall have good finishing, and no rust crack or plating failures.
2.2.2 Construction and dimensions Refer to individual product drawing.
2.3. ELECTRICAL SPECIFICATION
|
NO. |
Items |
Test conditions |
Criteria |
|
2.3.1 |
Contact resistance |
Shall be measured at 1KHz SMALL CURRENT(100 mA OR LESS) by voltage drop method after some operations without load. Applied position: Between terminal and terminal |
50mΩ MAX |
|
2.3.2 |
Insulation resistance |
Test voltage: 100VDC, measured after 60 ±5s Applied position: 1)Between terminal and terminal 2)Between terminal and ground |
100MΩ MIN |
2.4. ENVIRONMENT RESISTANCE
|
NO. |
Items |
Test conditions |
Criteria |
|
2.4.1 |
Low Temperature |
After testing at -25±3℃ for 96 h, the switch shall be allowed to stand under normal room temperature and humidity condition for 1h, and then measurement shall be made within 1 h. water drops shall be removed. |
Contact resistance: 100mΩ MAX Insulation resistance : 100MΩ MIN Voltage proof: No dielectric breakdown shall occur. Operating characteristic : Operating characteristic variety Within ±10% of specified value . No abnormalities shall be recognized in appearance and construction. |
|
2.4.2 |
High Temperature |
After testing at 85±2℃ for 96 h, the switch shall be allowed to stand under normal room temperature and humidity condition for 1h, and then measurement shall be made within 1 h. |
|
|
2.4.3 |
Steady Damp-heat |
After testing at 40±2℃ and 90-95%RH for 96 h, the switch shall be allowed to stand under normal room temperature and humidity condition for 1h, and then measurement shall be made within 1 h. water drops shall be removed. |
|
|
2.4.4 |
Change of temperature |
After 5 cycles of following conditions the switch shall be allowed to stand under normal room temperature and humidity condition for 1h, and then measurement shall be made within 1 h. water drops shall be removed. |
2.5. WELDING PERFORMANCE
|
2.5.1 |
Solder ability |
Switch test under such conditions and inspect after. 1）Variable temperature range ：235±5℃； 2）Dip time：3±0.5s； |
The area of dip tin should capture the 95% impregnated area |
|||||||||
|
2.5.2 |
Resistance to soldering heat |
The switch will be inspect under such conditions below Temperature and impregnated time
|
All of the appearance, motor functions, electrical properties are no abnormal. |
2.6. MECHANICAL CHARACTERISTICS
|
2.6.1 |
Operation Life |
Measurements shall be made following the test set forth below: 1) 25mA, 24VDC resistive load 2) Rate of Operation: 15~20 cycles/ minute 3) Cycle of Operation: 2,000 cycles. |
1)As show in item 1.3 2)Contact Resistance: 100mΩmax. (final-after test) |
|
2.6.2 |
Stop Strength |
A static load of 1kgf is applied in the operating direction and pulling direction operated for a period of 15 seconds. |
There shall be no sign of damage mechanically.
|
|
2.6.3 |
Vibration |
Shall be vibrated in accordance with Method 201A of MIL-STD-202F 1) Frequency: 10-55-10 Hz 1 min/cycle. 2) Direction: 3 vertical directions including the direction of operation. 3) Test Time: 2 hours each direction.
|
As shown in item 1.3.1-1.3.5 |
4. DRAWING & DIMENSION:
