EN 
ES
AR
NL
JA
KO
FR
RU
SWITECH SS12F46G4SW-NF 1P2T DIP Type slide switch with 4mm actuator
Series:SS12F46G4SW-NF
Quick Detail:
Type:SS12F46G4SW-NF
RATING:DC 50V 0.5A
FUNCTION:1P2T
- Remarks
- Applications
- Technical parameters
Remarks
1. PARTS LIST:
|
ITEM |
PARTS |
MATERIALS |
QUANTITY |
FINISH |
|
1 |
KNOB |
PA66 |
1 |
BLACK |
|
2 |
FRAME |
STEEL STRIP |
1 |
Ni PLATED |
|
3 |
CASE |
PHENOLIC STRIP |
1 |
NATURAL |
|
4 |
TERMINAL |
BRASS STRIP |
3 |
Ag PLATED |
|
5 |
CONTACT |
BRASS STRIP |
1 |
Ag PLATED |
|
6 |
SPRING |
STEEL WIRE |
1 |
NATURAL |
Applications
1.Digital Products: digital camera, digital video and so on;
2.Remote Control: the remote control of automobile domestic security products;
3.Communication Products: mobile phone, vehicle-mounted phone, telephone set, building equipment, PDA and so on;
4.Homehole appliances: TV set, microwave oven, electric rice cooker, electric fans ，refrigerator，washer;air-conditioning and so on;
5.Security Products: visual interphone, monitor and so on;
6.Toys: electric toys and so on;
7.Computer Products: PC camera and so on;
8.Exercises Machines: treadmills, massage armchair and so on;
9.Medical Device: sphygmomanometer, thermometer, hospital call system and so on;
10.Others: laser pen ，Pointer，Wireless mouse remote control pen，Laser projection pen，page turner，electronic pen；MousePen；overhead projector and so on;
11.Operating switches in all types of electronic equipment such as audio devices, office devices, communication devices, measuring instruments, TVs, video recorders，automotive sets, etc.
12.Household appliances, electric force, telecommunications, machine tool, vessel, textile, printing, Mining machine, Music Instrument, etc.
Technical parameters
2. DETAIL SPECIFICATIONS:
Type:SS12F46G4SW-NF
RATING:DC 50V 0.5A
FUNCTION:1P2T
2.1 OPERATING CHARACTERISTICS
|
NO. |
ITEM |
TEST CONDITIONS |
PERFORMANCE |
|
2.1.1 |
OPERATING FORCE |
MEASUREMENT SHALL BE MADE AT THE NEAREST POINT OF THE COMPONENT OR AT THE POINT 3mm FROM THE TIP OF THE ACTUATOR(KNOB) HIGH 5mm. |
250gf±100gf |
|
2.1.2 |
TERMINAL STRENGTH |
A STATIC LOAD OF(300gf)SHALL BE APPLIED TO THE TIP OF THE TERMINAL FOR 1 MIN IN ANY DERECTON. |
ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED WITHORT DAMAGE OR EXCESSIVE LOOSENESSOF ACTRATOR. |
|
2.1.3 |
PRACTICAL TEMPERATURE RANGE STANDARD ATMOSPHEIC CONDITIONS |
-10℃～+60℃. UNLESS OTHERWISE SPECIFIED.THE STANDARD RANGE OF ATMOSPHRIC CONDITIONS FOR MAKING MEASUREMENTS AND TESTS ARE AS FOLLOWS: (1)AMBIENT TEMPERATURE:5℃TO35℃ (2)RELATIVE HUMIDITY:45%TO85% (3)AIR PRESSURE:80Kpa TO 106Kpa |
THE LEVER SHALL HAVE NO SERIOUS DEFORMATION AND FUNCTION IS NORMALLY. |
2.2 GENERAL CHARACTERISTICS
2.2.1 Application: This specification is applied to SS Slide Switch used for electronic equipment.
2.2.2 Operating temperature range: -10℃ to 60℃
2.2.3 Test conditions : Unless otherwise specified. The atmospheric conditions for making measurements and tests are as follows
Ambient temperature: 15~35℃
Relative humidity: 45~85%
Air pressure: 86~106kPa (860~1060 mbar)
2.3 APPEARANCE, STRUCTURE AND DIMENSION
2.3.1 Appearance : Switch shall have good finishing, and no rust crack or plating failures.
2.3.2 Construction and dimensions: Refer to individual product drawing.
2.4. Electrical specifications
|
NO. |
ITEM |
TEST CONDITIONS |
PERFORMANCE |
|
2.4.1 |
CONTACT RESISTANCE |
MEASURED AT 1 KHz SMALL CURRENT(100 mA OR LESS) |
30mΩ MAX |
|
2.4.2 |
INSULATION RESISTANCE |
APPLY A VOLTAGE OF 500V DC SHALL BE APPLIED FOR 1 MIN AFTER WHICH MEASUREMENT BE MADE: (1) BETWEEN TERMINAL. (2) BETWEEN INDIVIDUAL TERMINAL AND FRAME. |
100MΩ MIN |
|
2.4.3 |
DIELECTRIC STRENGTH |
AC 500V rms(50~60Hz) FOR 1 MIN TRIP CURRENT: 0.5 mA (1) BETWEEN TERMINAL. (2) BETWEEN INDIVIDUAL TERMINAL AND FRAME. |
WITHOUT DAMAGE TO PARTS ARCING OR BREAKDOWN ETC. |
2.5 ENDURANCE
|
NO. |
ITEM |
TEST CONDITIONS |
PERFORMANCE |
|
2.5.1 |
LIFE TEST |
WITHOUT LOAD: AN ACTUATOR SHALL BE SUBJECT TO 10,000 CYCLES AT A SPEED OF 15~18 CYCLES FOR 1 MIN. |
(1)CONTACT ERSISTANCE SHALL BE 200mΩMAX. (2)MECHANICAL AND ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED.
|
|
2.5.2 |
HEAT TEST |
THE SWITCH SHALL BE STORED AT A TEMPERATURE OF 60±2℃ FOR96HOURS.AND THEN IT SHALL BE SUBJECTED TO THE CONTROLLED RECOVERY CONDITIONS FOR 1 HOUR AFTER WHICH MEASUREMENT SHALL BE MADE.
|
THERE SHALL BE NO DAMAGE ONAPPEARANCE. MECHANICAL AND ELECTRICAL CHARACTERISTICS SHALLBE SATISFIED. |
|
2.5.4 |
COLD TEST |
THE SWITCH SHALL BE STORED AT A TEMPERATURE OF -10±3℃ FOR48HOURS. THEN THE SWITCH SHALL BE MAINTAINED AT STANDARD ATMOSPHERIC CONDITIONS FOR 1 HOUR AFTER WHICH MEASUREMENT SHALL BE MADE |
|
|
2.5.5 |
HUMIDITY TEST
|
THE SWITCH SHALL BE STORED ATA TEMPERATURE OF 40±2℃ AND A HUMIFITY OF 90% TO 96% FOR 96 Hr.THEN THE SWITCH SHALL BE MAINTAINED ATST ANDARD ATMOSPHERIC CONDITION FOR. |
2.6. ENVIRONMENT RESISTANCE
|
NO. |
ITEM |
TEST CONDITIONS |
PERFORMANCE |
|||||||||
|
2.6.1 |
SOLDERA-BILITY TEST |
THE TOP OF THE TERMINALS SHALL BE DIPPED 2mm IN THE SOLDER BATH OF 260±5℃ FOR 3±0.5 SECONDS. |
THE AREA OF SOLDERING SHOULD BE OVER 90%
|
|||||||||
| 2.6.2 |
RESISTANCE TO SOLDERING HEAT TEST |
(1)TEMPERATURE AND IMMERSING TIME
(2)IMMERSION DEPTH: IMMERSION DEPTH UP TO THE SURFACE OF THE BOARD THICKNESS OF PRINTED WIRING BOARD 1.6mm. (3)WAVE SOLDERING (A)260±5℃ ,3±0.5S. (B)PREHEAT TIME SHALL BE 150 SECONDS MAX. AT 100℃MAX. |
THERE SHALL BE NO DEFORMATION OR CRACKS IN MOLDED PART. |
3. DRAWING & DIMENSION:
