EN 
ES
AR
NL
JA
KO
FR
RU
TS-4A-SWSE1C 3Ways 3 Pins mini ON-OFF-ON Toggle Switch
Series:TS-4A-SWSE1C
Quick Detail:
Type: TS-4A-SWSE1C
Rating: 3A@125 VAC or28VDC (Q contact) 1.5A 250VAC
- Remarks
- Applications
- Technical parameters
Remarks
Safety Approval:
1. This series carry the UL approvals and c-UL(the same effect with CSA)
2. E123142 The File no. of UL:E1231**
3. T80-T The applying category no. of UL: T80-T
4. The File no. of CQC: CQC03002007***
5. NE80 The applying category no. of CQC:NE80
6. ENEC File no ENEC-023**
Material：
|
No. |
Name |
Material |
|
1 |
CACE |
diallyl phthalate(DAP)(UL94V-0) |
|
2 |
ACTUATOR |
Copper alloy, chrome plated |
|
3 |
BUSHING |
Copper alloy, nickel plated |
|
4 |
HOUSING |
Stainless Steel |
|
5 |
SWITCH SUPPORT |
Copper alloy, tin plated |
|
6 |
END CONTACTS |
Copper alloy, silver plated(Q contact material) |
|
7 |
CENTER CONTACTS & ALL TERMINALS |
Copper alloy, silver plated(Q contact material) |
|
8 |
TERMINAL SEAL |
Epoxy |
Applications
1.Digital Products: digital camera, digital video and so on;
2.Remote Control: the remote control of automobile domestic security products;
3.Communication Products: mobile phone, vehicle-mounted phone, telephone set, building equipment, PDA and so on;
4.Homehole appliances: TV set, microwave oven, electric rice cooker, electric fans ，refrigerator，washer;air-conditioning and so on;
5.Security Products: visual interphone, monitor and so on;
6.Toys: electric toys and so on;
7.Computer Products: PC camera and so on;
8.Exercises Machines: treadmills, massage armchair and so on;
9.Medical Device: sphygmomanometer, thermometer, hospital call system and so on;
10.Others: laser pen ，Pointer，Wireless mouse remote control pen，Laser projection pen，page turner，electronic pen；MousePen；overhead projector and so on;
11.Operating switches in all types of electronic equipment such as audio devices, office devices, communication devices, measuring instruments, TVs, video recorders，automotive sets, etc.
12.Household appliances, electric force, telecommunications, machine tool, vessel, textile, printing, Mining machine, Music Instrument, etc.
Technical parameters
1. DETAIL SPECIFICATIONS:
Type: TS-4A-SWSE1C
Rating: 3A@125 VAC or28VDC (Q contact) 1.5A 250VAC
1.1 Programmer of test:
|
peculiarity |
ITEM |
DESCRIPTION |
TEST CONDITION |
REQUIREMENTS |
|
电气特性 |
1.1.1 |
Visual Examination |
By visual examination check without any pressure and testing |
There shall be no defect that affect the function of the product |
|
1.1.2 |
Contact Resistance |
①To be measured between the two terminals associated with each switch pole. ②Measurements shall be made with a 1kHz shall current contact resistance meter. |
20mΩ MAX(initial) |
|
|
1.1.3 |
Insulation Resistance |
500VDC,1min±5sec |
1000MΩ MIN |
|
|
1.1.4 |
Dielectric withstanding voltage |
1500VAC (50Hz or 60 Hz) shall be applied between all the adjacent terminals and between the terminal and the frame for 1 minute. |
There shall be no breakdown or flashover |
|
|
机械特性 |
1.1.5 |
Operating Force |
Applied in direction operation ON→OFF OFF→ON
|
10N max |
|
1.1.6 |
Stop Strength |
A static load of 30N is applied in the operating direction and pulling direction operated for a period of 30 seconds. |
There shall be no sign of damage mechanically |
|
|
1.1.7 |
Soldering Heat Resistance |
（1） Soldering Temperature：260±5°C （2） Duration of Solder Immersion：5±1 sec （3）Frequency of Soldering Process,2 times Max (PCB厚度为1.6mm) PCB is 1.6mm in thickness |
As show in item2~6 |
|
|
耐久性 |
1.1.8 |
Operation Life |
Measurements shall be made following the test set forth below: 3A,250VAC resistive load Rate of Operation：6~8cycles/minute Cycle of Operation：6000cycles |
As show in item 3.4 |
|
耐候性 |
1.1.9 |
Resistance Low Temperature |
Following the test set forth below the sample shall be left in normal temperature and humidity conditions for an hour before measurements are made Time：48 hours |
As show in item 2~6 |
|
1.1.10 |
Resistance high Temperature |
Following the test set forth below the sample shall be left in normal temperature and humidity conditions for an hour before measurements are made Time：48 hours |
||
|
1.1.11 |
Resistance Humidity |
Following the test set forth below the sample shall be left in normal temperature and humidity conditions for an hour before measurements are made Relative Humidity：90-95% Time：48 hours |
1.As show in item 4~6 2. Contact Resistance:100mΩ max 3.Insulation Resistance:10MΩ min |
Actuating Force:
The force required to move the actuator from the free to the operation position
1.2 GENERAL CHARACTERISTICS
1.2.1 Application: This specification is applied to T8019 Toggle Switch used for electronic equipment.
1.2.2 Operating temperature range: -30℃～+85℃
1.2.3 Test conditions : Unless otherwise specified. The atmospheric conditions for making measurements and tests are as follows
Ambient temperature: 15~35℃
Relative humidity: 45~85%
Air pressure: 86~106kPa (860~1060 mbar)
1.3 APPEARANCE, STRUCTURE AND DIMENSION
1.3.1 Appearance :Switch shall have good finishing, and no rust crack or plating failures.
1.3.2 Construction and dimensions: Refer to individual product drawing.
1.4 Programmer of test:
|
peculiarity |
ITEM |
DESCRIPTION |
TEST CONDITION |
REQUIREMENTS |
|
电气特性 |
1.4.1 |
Visual Examination |
By visual examination check without any pressure and testing |
There shall be no defect that affect the function of the product |
|
1.4.2 |
Contact Resistance |
① To be measured between the two terminals associated with each switch pole. ②Measurements shall be made with a 1kHz shall current contact resistance meter. |
20mΩ MAX(initial) |
|
|
1.4.3 |
Insulation Resistance |
500VDC,1min±5sec |
1000MΩ MIN |
|
|
1.4.4 |
Dielectric withstanding voltage |
1500VAC (50Hz or 60 Hz) shall be applied between all the adjacent terminals and between the terminal and the frame for 1 minute. |
There shall be no breakdown or flashover |
|
|
机械特性 |
1.4.5 |
Operating Force |
Applied in direction operation ON→OFF OFF→ON
|
10N max |
|
1.4.6 |
Stop Strength |
A static load of 30N is applied in the operating direction and pulling direction operated for a period of 30 seconds. |
There shall be no sign of damage mechanically |
|
|
1.4.7 |
Soldering Heat Resistance |
（1） Soldering Temperature：260±5°C （2） Duration of Solder Immersion：5±1 sec （3） Frequency of Soldering Process,2 times Max (PCB厚度为1.6mm) PCB is 1.6mm in thickness |
As show in item2~6 |
|
|
耐久性 |
1.4.8 |
Operation Life |
Measurements shall be made following the test set forth below: 1.5A,250VAC resistive load ‚Rate of Operation：6~8cycles/minute ƒCycle of Operation：6000cycles |
As show in item 3.4 |
|
耐候性 |
1.4.9 |
Resistance Low Temperature |
Following the test set forth below the sample shall be left in normal temperature and humidity conditions for an hour before measurements are made ‚Time：48 hours |
As show in item 2~6 |
|
1.4.10 |
Resistance high Temperature |
Following the test set forth below the sample shall be left in normal temperature and humidity conditions for an hour before measurements are made ‚Time：48 hours |
||
|
1.4.11 |
Resistance Humidity |
Following the test set forth below the sample shall be left in normal temperature and humidity conditions for an hour before measurements are made ‚Relative Humidity：90-95% ƒTime：48 hours |
1.As show in item 4~6 2. Contact Resistance:100mΩ max 3.Insulation Resistance:10MΩ min |
2. DRAWING & DIMENSION:
3.Circuit diagram
