EN 
ES
AR
NL
JA
KO
FR
RU
TS2V-095C 6x6mm 9.5mm height tact switch with 2 pins
Series:TS2V
Quick Detail:
Type: TS2V-095C
Operation method: Tact Action
Configuration: Instrument with feeling feedback
Terminal form: SMT type（□BRAID ■NO BRAID）
Mounting: Soldering
Protection: Comply with ■IP40 □IP65 □IP67 □IP68
- Remarks
- Applications
- Technical parameters
Remarks
PARTS LIST:
|
|
No. |
Name |
Material |
|
1 |
1 |
Terminal |
Brass Silver plating |
|
2 |
1 |
Contact |
F.Ag/C5210 Contact side silver plating |
|
3 |
1 |
Case |
PA66-G30, Black |
|
4 |
1 |
Frame |
SPCC-SD, CuSn plating |
|
5 |
1 |
Stem |
PA66-G30, Black |
Returned plastic should not exceed 20%.
Applications
1.Shipping tool:Amazon dash button;
2.Audio Products:MP3,MP4,DVD. Audio;
3.Digital Products: digital camera, digital video and so on;
4.Remote Control: the remote control of automobile domestic security products;
5.Communication Products: mobile phone, vehicle-mounted phone, telephone set, building equipment, PDA and so on;
6.Homehole appliances: TV set, microwave oven, electric rice cooker, electric fans ，refrigerator，washer;air-conditioning and so on;
7.Security Products: visual interphone, monitor and so on;
8.Toys: electric toys and so on;
9.Computer Products: PC camera and so on;
10.Exercises Machines: treadmills, massage armchair and so on;
11.Medical Device: sphygmomanometer, thermometer, hospital call system and so on;
12.Others: laser pen ，Pointer，Wireless mouse remote control pen，Laser projection pen，page turner，electronic pen；MousePen；overhead projector and so on;
13.Operating switches in all types of electronic equipment such as audio devices, office devices, communication devices, measuring instruments, TVs, video recorders，automotive sets, etc.
14.Household appliances, electric force, telecommunications, machine tool, vessel, textile, printing, Mining machine, Music Instrument, etc.
Technical parameters
2.1 General
2.1.1 Application This specification is applied to TACT Switch used for electronic equipment.
2.1.2 Operating temperature range -20℃ ～ +70℃
2.1.3 Storage temperature -30℃ ～ +80℃
2.1.4 Test conditions
Ambient temperature 5~35℃
Relative humidity 45~85%
Air pressure 86~106kPa (860~1060 mbar)
Should any doubt arise in judgment. tests shall be conducted at the following conditions.
Ambient temperature： 20±2℃
Relative humidity 60~70%
Air pressure 86~106kPa (860~1060 mbar)
2.2 Appearance construction and dimensions
2.2.1 Appearance Switch shall have good finishing, and no rust crack or plating failures.
2.2.2 Construction and dimensions Refer to individual product drawing.
2.3. ELECTRICAL SPECIFICATION
|
NO. |
Items |
Test conditions |
Criteria |
|
2.3.1 |
Contact resistance |
Applying a static load of 2 times operating force to the center of the stem, measurements shall be made by 5V DC 10mA or more than 1KHZ AC small-current contact resistance meter. |
50mΩ MAX |
|
2.3.2 |
Insulation resistance |
Measurement shall be made following application of 100V DC potential, across terminals, and across terminals and cover, for one minute. |
100MΩ MIN |
|
2.3.3 |
Voltage proof |
Following test voltages shall be applied for 1 min. (Cut-off current:0.5mA) Between terminal and terminal :250VAC (50~60Hz) |
No dielectric breakdown shall occur. |
|
2.3.4 |
Contact bounce |
Lightly striking the center of the stem at a rate encountered in normal use (3 to 4 times per second), and bounce shall be tested at “ON” and “OFF”
|
ON-3msec.max OFF-8msec.max |
2.4. ENVIRONMENT RESISTANCE
|
NO. |
Items |
Test conditions |
Criteria |
|||||||||||
|
2.4.1 |
Resistance to low temperature |
After testing at -30±2℃ for 96h, the switch shall be allowed to stand under normal room temperature and humidity condition for 1h, and then measurement shall be made within 1 h. water drops shall be removed. |
Contact resistance: 200mΩ MAX Insulation resistance: 50MΩ MIN Voltage proof: No dielectric breakdown shall occur. |
|||||||||||
|
2.4.2 |
Heat resistance |
After testing at 80±2℃ for 96h, the switch shall be allowed to stand under normal room temperature and humidity condition for 1h, and then measurement shall be made within 1 h. |
||||||||||||
|
2.4.3 |
Moisture resistance |
After testing at 60±2℃ and 90-95%RH for 96h, the switch shall be allowed to stand under normal room temperature and humidity conditionfor 1h, and then measurement shall be made within 1 h. water drops shall be removed. |
||||||||||||
|
2.4.4 |
Change of temperature |
After 5 cycles of following conditions the switch shall be allowed to stand under normal room temperature and humidity condition for 1h, and then measurement shall be made within 1 h. water drops shall be removed.
|
||||||||||||
|
2.4.5 |
Sulfuration resistance |
Following the test set forth below the sample shall be left in normal temperature and humidity conditions for 1 h before measurements are made: 1) H2S gas concentration:3ppm±1ppm 2) Time: 72h 3) Temperature:40±2℃(90~95RH) |
Operating characteristic: Operating characteristic variety Within ±10% of specified value . |
|||||||||||
|
2.4.6 |
Salt mist |
The switch shall be checked after following test: 1) Temperature: 35±2℃ 2) Salt solution : 5±1%(solids by mass) 3) Time: 4±1 hour After test, salt deposit shall be removed by running water. |
2.5. WELDING PERFORMANCE
|
2.5.1 |
Solder ability |
Switch test under such conditions and inspect after. 1）Variable temperature range ：245±5℃； 2）Dip time：2±0.5s； |
The area of dip tin should capture the 90% impregnated area |
|||||||||
|
2.5.2 |
Resistance to soldering heat |
The switch will be inspect under such conditions below Temperature and impregnated time
|
All of the appearance, motor functions, electrical properties are no abnormal. |
2.6. DURABILITY
|
2.6.1 |
Operation life |
Measurement shall be made following the test set forth below: 1) DC 12V, 50mA resistance load 2) Rate of operation: 120 times/min. 3) Operating Force：1.5~2 times 4) Average fault-free life: 60,000 cycles |
Contact resistance: ≤500mΩ Contact bounce: ≤10ms Operating Force: initial value±30% |
|
2.6.2 |
Vibration |
Measurement shall be made following the test set forth below: 1) Vibration frequency range: 10~55~10Hz; 2) Amplitude: 1.5mm; 3) Direction of vibration: three mutually perpendicular direction including the direction of stem travel 4) Duration: Each 2 hours. |
|
|
2.6.3 |
Operation Force |
The switch is placed perpendicular to the direction of the operation, gradually force in key top center of switch, measure maximum intensity when it conducted required. |
260±50gf |
|
2.6.4 |
Over Travel |
Switch at the vertical operating orientation placement, with a force equal to 2 times according to the static load applied on the switch button the top center, measure the top moving distance |
0.25±0.10mm |
|
2.6.5 |
Resilience |
The switch is placed perpendicular to the direction of the operation, the switch key top center fell to a full stroke, the converted measurement from the top of the intensity of free position. |
60gf.min. |
|
2.6.6 |
Stop strength |
The switch is placed perpendicular to the direction of the operation, the static load applied 30N from the operation direction keys to continue 1min. |
no mechanism and electricity damage |
|
2.6.7 |
Stem strength |
The switch is placed perpendicular to the direction of the operation, applying tension on the keys from the opposite direction of operation, measure the maximum tension when the key is pulled out. |
20N.min. |
3. DRAWING & DIMENSION:
